Aztech Wireless Repeater WL559E (Price: RM 129.00)

Aztech WL559E is a Wall-Plugged 300Mbps Wireless-N Range Repeater, which supports wireless 802.11b/g/n, and one 10/100 Base-T Ethernet port.

WL559E supports robust 802.11n technology with up to 300Mbps data transfer rate. The extender can take an existing 802.11n wireless signal, repeat and extend it to a longer range where it is too far away for the router or access point to reach. It eliminates the cable wires while providing the same reliable network connection. It can repeat and extend the wireless signal from virtually any 802.11n wireless router or access point that is launched on the market. It is backwards compatible with the 802.11b/g router or access point.

Make Wired Network WiFi Ready
The repeater is equipped with 1 x 10/100M Auto MDI/MDIx LAN port that can be used to connect to an existing wired network to serve as a wireless interface. It can also be used to configure the repeater via its web-based GUI, or upgrade the firmware.

MIMO Technology
The device is designed with MIMO technology, which successfully reduces 'dead spot', and extends network coverage within a home or in the building.

Advanced Security
WL559E features with 64/128-bit WEP encryption and WIFI Protected Access (WPA), WPA2 to ensure the network security and prevent unauthorized access to you network.

Portable without the Need of External Power Supply
The device is easy to setup. It is portable with no need of any external power adaptor. It comes with the embedded power supply and power plug, so that users can just plug the device into a power socket.

Product Features:

• Supports ratified 802.11n technology with the data transfer rate up to 300Mbps.
• Repeats existing wireless signal to areas where the router or access point is not able to reach.
• Shares large files, printing and storage quickly and reliably in wider range in your home or office.
• Eliminates the use of cable wires while providing reliable wireless connection.
• Enables wired network wireless ready through the LAN port
• MIMO technology to reduce "dead spot" and increase network coverage.
• WEP, WPA, and WPA2 to ensure network security from unauthorized access.
• User-friendly web-based GUI and easy hardware setup. No need of external power adaptor
• Support WPS to both router and client device

PRODUCT SPECIFICATIONS

Protocol/Standards/Support

Wireless IE EE802.11b/g/n Ethernet IEEE 802.3 10/100, IEEE802.3u, IEEE802.3ab

Network Support

OFDM 1024/256/64/16/8 QAM, QPSK, BPSK and ROBO Modulation Scheme Wireless IEEE802.11n: BPSK, QPSK, QAM-16, QAM-64 IEEE802.11g: BPSK, QPSK, QAM-16, QAM-64 IEEE802.11b: CCK, QPSK, BPSK

Wireless Frequency Band

Europe (ETSI): 2.412GHz ~ 2.742GHz (CH1 ~ CH13)

Security Support

Wireless: 64/128-bit WEP, WPA, WPA2

HARDWARE

Key Chipset: Ralink RT3352 Network Processor + WLAN Controller SPI FlashRom: 4M Byte (Default) DDR2 DRAM: 64M Byte

PLATFORM SUPPORT

OS Independent with TCP/IP protocol installed

POWER REQUIREMENTS

Supply voltage range: 100VAC – 240VAC (50/60 Hz) Power Consumption : Less than 4W Max Current : 0.12A

External Connectors

1 x RJ45 for 10/100Base-T LAN 1 x Factory Default Reset Button 1 x WPS button 2 x Internal antennas

Dimension

105(L) x 58 (W) x 42 (H) mm

Weight

160 g

Temperature

Operating : 0 o to 40 o Celsius(32 o to 104 o Fahrenheit) Non-Operating :-25 o to 70 o Celsius(-13 o to 158 o Fahrenheit)

HUMIDITY

Operating : 30% to 90% Relative Humidity (Non-Condensing) Non-Operating : 30% to 95% Relative Humidity (Non-Condensing)