Aztech ADSL2+ 150Mbps Wireless-N 4-Port Modem Router (Price: RM 115.00)

The Aztech DSL5005EN ADSL2+ 150Mbps Wireless-N 4-Port Modem Router uses complete Ralink chipsets solution that fully complies with ADSL2/ADSL2+ standard.

The Aztech DSL5005EN supports 1T1R with PHY rate at 150Mbps.

Targeted at the residential and SOHO users that desires high quality triple play services, it is the ideal solution to provide a 6 in 1 device for both Wired and Wireless connectivity via a ADSL2+ built in modem, Routing functionality for multi-user sharing, double-layer NAT/SPI firewall, 4 port 10/100 AutoMDI/MDIx Managed Switch for video application QoS, high speed IEEE802.11b/g/n Wireless LAN Access point.

Aztech DSL5005EN is TR-069 compliant. TR-069 is a DSL forum technical specification report that defines the remote control/configuration of CPE from ACS (Auto Configuration Server), TR-069 is also well-known as "CPE WAN Management Protocol". The benefits of TR-069 include, remote management, auto-configuration, dynamic service activation, as well as saving cost on customer support and logistics.

Security is provided via a double Stateful Packet Inspection and NAT based firewall. Hardware accelerated AES/WEP/WPA/WPA2 based encryption/MAC Address Filtering for Wireless links. Multiple session VPN Pass-through and DMZ support provide additional security support for telecommuters as well as allow flexibility while maintaining security against malicious hackers. Choices of Dynamic DNS server give users the flexibility of hosting a web or an FTP server with various domain names.

With Universal Plug and Play support, home networking becomes a breeze for everyone in the family. Multi Port Range/Popular Application Forwarding makes it even easier to select which application you want your network to allow while ensuring your security at the same time.

PRODUCT SPECIFICATIONS

ADSL Support

ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant G.992.3 (ADSL2), G.992.5 (ADSL2+), RE-ADSL2(Annex L) Annex A, B, I, J and M Support Erasure Decoding and Impulse Noise Monitoring Embedded hardware ATM AAL-5 SAR supports UBR, UBR+, CBR and VBR and GFR traffics Configurable USB2.0 EHCI host or device controller PCIe gen1 interface for 802.11a/b/g/n WLAN solution Multiple PVC up to 8 support Spectral compatibility with POTS F4 & F5 OAM Loopback/Send and Receive TR100 compliant

Encapsulation Support

RFC2684 Bridge and Routed LLC and VC Mux support RFC2364 PPPoA Client support RFC2516 PPPoE Client support RFC2225/RFC1577 Classical IP Support Transparent Bridge Support PAP/CHAP/MS-CHAP for Password Authentication Support

Network Support

Static IP, Dynamic RIP v1/v2 routing support IP/TCP/UDP/ICMP/ARP Application Support Network Address Translation (NAT) PVC to VLAN Mapping Port Forwarding/Triggering Easy setup of Port Forwarding rules for popular Games/Application NAT Application Level Gateway for popular applications DHCP Server/Relay/client DNS Relay Agent DMZ support SIP ALG (Application Layer Gateway) support Multiple Sessions IP Sec and PPTP/L2TP VPN pass through support PPP Always on PPP Dial on Demand with configurable timeout Universal Plug and Play Support DDNS (Dynamic DNS) Support IGMP Proxy Support (IGMP v1 and v2) SNTP Support QoS Support (DSCP, TOS), including Diffserv, IEEE802.1p - Priority bit, IEEE802.1q - VLAN triggering PPP/DHCP Auto Detection (Future release) TR-069 Compliant

WLAN Support

1x1 Wireless on Board IEEE 802.11b/g and IEEE 802.11n compliant 1T1R Mode with 150Mbps PHY rate for Both Transmit and Receiving Transmit output power up to 20dBm (standard) Legacy and High Throughput Modes 20MHz/40MHz Bandwidth Reverse Direction Grant Data Flow and Frame Aggregation Frequency Band:     2412 MHz - 2462 MHz (North America/FCC)     2412 MHz - 2472 MHz (ETSI/Europe)     2412 MHz - 2484 MHz (Japan)     2457 MHz - 2472 MHz (France)     2457 MHz - 2462 MHz (Spain) Support Direct Sequence Spread Spectrum (DSSS) technology Modulation: OFDM with BPSK, QPSK, 16QAM, 64QAM, DBPSK, DQPSK, CCK Wireless Media Access Protocol- CSMA/CA with ACK WEP 64/128, WPA, WPA2, TKIP, AES QoS-WMM, WMM-PS WPS support Cisco CCX Support Operating Range of >300 Meters (Open Air) WDS Support (Wireless Distribution System) MAC Address Filtering Multiple BSSID Support Low Power and Advanced Power Management

Management Support

Web Based HTTP management GUI TFTP/FTP Support for Firmware Upgrade Web Based Firmware Upgrade (Local) Soft Factory Reset Button via Web GUI Diagnostic Test (DSL, OAM (ADSL), Network (ADSL), Ping Test) TR068 - WAN Access Telnet with CLI (Read and Write) configuration Syslog Support Firmware upgrade-able for future feature enhancement Quick firmware upgrade button (population option) TR-069 (include TR-098, TR-111) SNMP v1 and v2 TR-143 SSH Support

Security Support

NAT for basic Firewall support Packet Filtering Firewall Support Stateful Packet Inspection Support Protection against Denial of Service attacks Password Authentication to Modem URL filtering/ Parental Control (Option) Real-Time Attack and Alert Logs (Option)

HARDWARE

Ralink TC3162U Processor Ralink TC3086 AFE Ralink TC2205F 5-Port Ethernet Switch Ralink RT5390 (Wireless Mac/BBP) Dying Gasp Support (Population Option) WPS Support Wifi Active/Enable Support 4MB SPI flash (Option for 8MB and 16MB) 16MB SDRAM (Option for 32MB) ITU K.21 Support

PLATFORM SUPPORT

For Ethernet: OS Independent

POWER REQUIREMENTS

Input Voltage: 12V DC +/- 10% Input Current: 1.0A

LED Indicators

1 x WIFI DISABLE Button 1 x “WIFI” Status LED (LED ON : WIFI ON, LED OFF : WIFI OFF) 1 x “Power” LED (Green and Red LED) 4 x Ethernet Link Status (Green) LED 1  x “Wireless”  LAN  Link/Activity  Status           (Green)  LED  1 x “DSL” Status (Green) LED 1 x “Internet” Status (Green and Red) LED 1 x “WPS” Status LED 1 x WPS Button

External Connectors

1 x RJ-11 Telephone socket for DSL line 4 x RJ45 for 10/100Base-T Ethernet (AutoMDI/MDIx) 1 x DC Jack for Power Input 1 x Factory Default Reset Button 1 x On/Off Push Button Switch 1 x 180° Fixed 2.4Ghz 3 dBi Antenna

Measurements

Dimension : 200mm x 125mm x 30mm Weight : Approx. 330 g

REGULATORY APPROVALS (PENDING)

US : FCC Part 15B, 15.247/68, UL 3rd Edition Asia Pacific/ Europe : EN300328, EN301489, IEC60950

ENVIRONMENTAL

TEMPERATURE Operating: 0°C to 40°C (32° to 104°F) Non-Operating: -25°C to 70°C Celsius (-13°F to 158°F) HUMIDITY Operating: 30% to 90% Relative Humidity (Non-Condensing) Non-Operating: 30% to 95% Relative Humidity (Non-Condensing)