APC Back-UPS 1100VA with AVR, IEC, 230V

Model: BX1100-CI

Technical Specification:

Output

Output Power Capacity

660 Watts / 1100 VA

Nominal Output Voltage

230V

Efficiency at Full Load

97.0%

Output Frequency (sync to mains)

50/60Hz +/- 3 Hz

Topology

Line Interactive

Waveform Type

Stepped approximation to a sinewave

Output Connections

(6) IEC 320 C13 (Battery Backup)
(1) IEC Jumpers (Battery Backup)

Efficiency at Half Load

95%

Input

Nominal Input Voltage

230V

Input Frequency

50/60 Hz +/- 3 Hz (auto sensing)

Input Connections

IEC-320 C14

Cord Length

1.16 meters

Input voltage range for main operations

150 - 280V

Maximum Input Current

5A

Input Breaker Capacity

10.0  A

Batteries & Runtime

Battery Type

Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Typical recharge time

8 hour(s)

Replacement Battery

APCRBC113

RBC™ Quantity

1

Communications & Management

Control panel

LED Status display with On Line : On Battery

Audible Alarm

Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

Surge energy rating

273 Joules

Data Line Protection

--

Physical

Maximum Height

215.00 mm

Maximum Width

130.00 mm

Maximum Depth

336.00 mm

Net Weight

12.00 KG

Shipping Weight

12.92 KG

Shipping Height

295.00 mm

Shipping Width

245.00 mm

Shipping Depth

440.00 mm

Color

Black

SCC Codes

0073130429134 3

Environmental

Operating Environment

0 - 40 °C

Operating Relative Humidity

0 - 95%

Operating Elevation

0-3000 meters

Storage Temperature

-15 - 40 °C

Storage Relative Humidity

0 - 95%

Storage Elevation

0-9000 meters

Audible noise at 1 meter from surface of unit

BX1100CI Features

Battery failure notification 

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Overload protection 

Safeguards unit from damage by automatically turning it off in the event of a short circuit or overload.

Resettable circuit breaker 

Easy recovery from overloads; no need to replace a fuse.

Replace Battery LED 

An external Replace Battery LED informs the end-user that the battery needs to be replaced.

Cold-start capable 

Provides temporary battery power when the utility power is out.

Disconnected battery notification 

Warns when a battery is not available to provide backup power.

Automatic self-test 

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Adjustable voltage sensitivity 

Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Audible alarms 

Provides notification of changing utility power and UPS conditions

Boost and Trim Automatic Voltage Regulation (AVR) 

Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Intelligent battery management 

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Automatic Voltage Regulation (AVR) 

Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

Back-UPS Features & Benefits

Protection

Lightning and Surge Protection

Protection from surges, spikes and even lightning is guaranteed!

Resettable circuit breaker

Instead of a hard to find fuse, there is a push-button circuit breaker for easy recovery from an overload or short circuit.

Convenience

Audible alarms

Proactively notifies you of changing UPS and utility power conditions.

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Transformer Block Spacing

Designed to allow the use of up to two transformer block plugs without blocking access to other receptacles.